Problem | Possible cause Solution |
The computer | The camera is not |
does not | configured correctly |
recognize the | for the type of |
camera and | computer you have. |
the automatic |
|
image unload |
|
does not |
|
start. |
|
Open the Setup menu and check the PC Connect Mode setting:
•If you are using a Windows computer, make sure PC Connect Mode is set to Digital Camera.
•If you are using a Macintosh computer, make sure PC Connect Mode is set to Disk Drive.
Your Macintosh | Go to the Support section of |
computer has an | www.apple.com and download the USB |
older version of OS | Mass Storage Support (version 1.3.5) |
8.6, which does not | update. |
support USB mass |
|
storage. |
|
The Arcsoft/ Virtual memory not
Photoset to at least 96
Impressions MB. application
does not run when double- clicked on your Macintosh computer
Activate Virtual memory in the Memory Control Panel and set to at least 96 MB.
Error messages
If an error message appears on the image display, try one of the following solutions.
Error | Possible cause | Solution |
message |
|
|
|
|
|
BAD CF CARD! | The CF memory card is | Reformat the CF memory |
| damaged. | card or replace the card. |
BATTERIES ARE | Power in the batteries is |
TOO LOW FOR | insufficient for you to |
LIVE VIEW | preview your pictures. |
| However, you can take |
| pictures or review your |
| images. |
Press the button to turn the image display off and use the viewfinder to frame your pictures.
56 | HP photosmart 612 User Guide |