SMC Networks SMC6724L3 Neighbor, No networks are specified, Router rip, No neighbors are defined

COMMAND LINE INTERFACE

Default Setting

No networks are specified.

Command Usage

•RIP only sends updates to interfaces specified by this command.

•Subnet addresses are interpreted as class A, B or C, based on the first field in the specified address. In other words, if a subnet address nnn.xxx.xxx.xxx is entered, the first field (nnn) determines the class:

0 - 127 is class A, and only the first field in the network address is used. 128 - 191 is class B, and the first two fields in the network address are used.

192 - 223 is class C, and the first three fields in the network address are used.

Example

This example includes network interface 10.1.0.0 in the RIP routing process.

Console(config-router)#network 10.1.0.0

Console(config-router)#

Related Commands

router rip (4-231)

neighbor

Use this command to define a neighboring router with which this router will exchange routing information. Use the no form to remove an entry.

Syntax

neighbor ip-addressno neighbor ip-address

ip-address- IP address to map to a specified hardware address.

Command Mode

Router Configuration

Default Setting

No neighbors are defined.

4-234