SMC Networks SMC6724L3 manual Routing Information Protocol RIP, Router rip

IP ROUTING COMMANDS

Routing Information Protocol (RIP)

Command	Function	Mode	Page
router rip	Enables the RIP routing protocol	GC	4-231
timers basic	Sets basic timers, including update, timeout,	RC	4-232
	garbage collection
network	Specifies the network interfaces that are to use	RC	4-233
	RIP routing
neighbor	Defines a neighboring router with which to	RC	4-234
	exchange information
version	Specifies the RIP version to use on all network	RC	4-235
	interfaces (if not already specified with a receive
	version or send version command)
ip rip receive	Sets the RIP receive version to use on a	IC	4-236
version	network interface
ip rip send version	Sets the RIP send version to use on a network	IC	4-237
	interface
ip split-horizon	Enables split-horizon or poison-reverse loop	IC	4-239
	prevention
ip rip	Enables authentication for RIP2 packets and	IC	4-240
authentication key	specifies keys
ip rip	Specifies the type of authentication used for	IC	4-241
authentication	RIP2 packets
mode
show rip globals	Displays global configuration settings and	PE	4-242
	statistics for RIP
show ip rip	Displays RIP configuration information for	PE	4-242
	each network interface

router rip

Use this command to enable Routing Information Protocol (RIP) routing for all IP interfaces on the router. Use the no form to disable it.

Syntax

router rip no router rip

4-231