SMC Networks SMC6724L3 manual Ip ospf dead-interval, 267, Ip ospf hello-interval4-268

IP ROUTING COMMANDS

ip ospf dead-interval

Use this command to set the interval at which hello packets are not seen before neighbors declare the router down. Use the no form to restore the default value.

Syntax

ip ospf dead-interval seconds no ip ospf dead-interval

seconds - The maximum time that neighbor routers can wait for a hello packet before declaring the transmitting router down. This interval must be set to the same value for all routers on the network. (Range: 1-65535)

Command Mode

Interface Configuration (VLAN)

Default Setting

40, or four times the interval specified by the ip ospf hello-intervalcommand.

Example

Console(config)#interface vlan 1

Console(config-if)#ip ospf dead-interval 50

Console(config-if)#

Related Commands

ip ospf hello-interval(4-268)

4-267