SMC Networks SMC6724L3 manual Access Control List Commands

COMMAND LINE INTERFACE

802.1X	Port Details
802.1X	is disabled on port 1
.
.
.
802.1X	is enabled on port 26

Max request	2
Quiet period	350
Reauth period	300
Tx period	300
Status	Unauthorized
Port-control	Auto
Supplicant	00-00-00-00-00-00
Authenticator State	Machine
State	Connecting
Reauth Count	3
Backend State Machine
State	Idle
Request Count	0
Identifier(Server)	0
Reauthentication State Machine
State	Initialize
Console#

Access Control List Commands

Access Control Lists (ACL) provide packet filtering for IP frames (based on address, protocol, TCP/UDP port number or TCP control code) or non-IP frames (based on MAC address or Ethernet type). To filter incoming packets, first create an access list, add the required rules, and then bind the list to a specific port.

An ACL is a sequential list of permit or deny conditions that apply to IP addresses, MAC addresses, or other more specific criteria. This switch tests incoming packets against the conditions in an ACL one by one. If a list contains all permit rules, a packet will be accepted as soon as it passes any of the rules. If a list contains all deny rules, then a packet will be rejected as soon as it fails any one of the rules. In other words, if no rules match for a permit list, the packet is dropped; and if no rules match for a deny list, the packet is accepted.

4-74