Sierra Wireless 20070914 manual AT Commands and the Command String, AceManager UDP MD

Raven 1x

Figure 2-1: AceManager : UDP > MD

The Raven needs a command string sent to the modem after it is initialized. The command string will need to be tailored for your application. Different models of the Raven may respond differently to some of the commands. In the PassThru group, type your command string in the input field for *PTINIT.

Figure 2-2: AceManager: PassThru

AT Commands and the Command String

Each modem requires a command string that is a combination of AT commands limited to a maximum of 40 characters. The command string will vary depending on the needs of the connected device. For example, some devices need DTR to be high while others need DTR to be ignored. For a full listing as well as parameters and defaults, refer the AT Command appendix.

Caution: The only commands that can be used in the string are those which do not require ALEOS. All AT Commands beginning with an * (asterix) require ALEOS.

Tip: The model number of your modem is on the label on the top of the case (example, Raven 1x C3211-S or Raven CDMA C3210).

134 20070914