Sierra Wireless 20070914 manual Telemetry/Addr List, DBGCOMMLVL=n, DBGIPLVL=n, DBGPPPLVL=n

Raven 1x

Figure 1-14: AceManager : Logging

*DBGCOMMLVL=n

Set the logging level for the host or module COM port.

•n=0 : No logging

•n=1 : Host COM Port

•n=2 : Module COM Port

*DBGIPLVL=n

Sets the logging level for the IP subsystem.

•n=0 : No logging

•n=1 : Log errors (i.e. invalid/corrupt packets, etc.).

•n=2 : Log the header of all received packets. Note that this can quickly exhaust available space for the event log.

•n=3 : Log the header of all received and sent packets. Note that this can quickly exhaust available space for the event log.

*DBGPPPLVL=n

Sets the logging level for the PPP stack.

•n=0 : No logging

•n=1 : Log client events (default)

•n=2 : Log server events

•n=3 : Log client and Server events

Telemetry/Addr List

Modbus, commonly used with telemetry devices, allows a connection via serial port to the modem. Telemetry and Addr List commands are only used when the modem is in one of the Modbus start‐up modes. Further, Telemetry and the Addr List are available with all Raven line modems which have a serial port, such as the Raven X and the Raven XT.

126 20070914