Sierra Wireless 20070914 manual AT Commands Requiring PassThru mode

Models: 20070914

1 171
Download 171 pages 23.08 Kb
Page 100
Image 100

Configuration Commands

+HWTEMP?

Displays the internal temperature of the radio module in degrees Centigrade.

+PRL?

Preferred Roaming List (PRL) version.

Information Displayed in AceManager without AT Commands Listed

Bytes and Packets Received and Sent: Network traffic for the applicable port.

Number of System Resets: Counter of the number of system resets over the life of the modem or since the configuration was reset.

Bad Password Count: Counter of the number of bad password attempts.

IP Reject Count or Log: Rejected IP Data.

Temperature of the Internal Hardware Module: The temperature of the internal radio module.

AT Commands Requiring PassThru mode

These commands are not displayed in AceManager.

+CBIP?

The current IP address of the modem reported by the internal module, generally obtained from TELUS. This is the address can contact the Raven from the Internet.

Note: If there is no current network IP address, 0.0.0.0 may be displayed.

+CMIP

Mobile Station IP Address.

+CSQ

Received Signal Strength and Channel Frame Error Rate.

+CSSN?

Serving System.

 

 

 

 

 

 

 

Rev 3.0B Feb.08

 

 

 

 

 

95

 

 

 

Page 100
Image 100
Sierra Wireless 20070914 manual AT Commands Requiring PassThru mode