If the above recommendations do not work, try the same steps by using a different computer. The switch might have some hardware problems if the second computer also fails to establish a link, please contact technical support for further assistance.
NOTE If you need help resolving a problem, visit the Cisco Small Business Support Community at www.cisco.com/go/ smallbizsupport. For technical documentation and other links, see Where to Go From Here, page 9.
Returning the Switch to the Factory Default Settings
The Factory Default window allows network managers to reset the switch to the factory defaults shipped with the switch. Restoring factory defaults erases the configuration file. This should only be performed as a last resort.
Restoring the factory defaults will erase all of your current configuration settings. Before you restore the factory defaults, you can save a backup of your current configuration settings from the Save Configuration window.
You can also restore the factory defaults of your switch by pressing and holding the Reset button on the front of the switch for more than ten seconds.
Next Steps
Congratulations, you are now ready to start using your switch. Consider taking some of the following steps:
•Go to the “Getting Started” section of the Cisco Small Business SLM Smart Switch Administration Guide. This is the starting point for detailed configuration of the switch.
•Change the default password of the switch to protect it from unauthorized access.
•Visit the software downloads area at http://tools.cisco.com/support/ downloads and navigate to your model of the switch. Check for the latest version of software to ensure your switch is running the most recent version of the firmware.
•Review additional documentation and resources at http:// www.cisco.com/en/US/products/ps9994/ tsd_products_support_series_home.html
8 | Cisco Small Business SLM Series Smart Switch Installation Guide |
