Cisco Systems SLM2048, SLM2024 SLM248G, SLM248P, SLM224G, and SLM224P, Front Panel, Switch Model

To establish a Fast Ethernet connection using a miniGBIC port, you will need to install a MFEFX1 (100BASE-FX) or MFELX1 (100BASE-LX) 100SFP transceiver and use fiber optic cabling.

NOTE On the SLM2024 and SLM2048, miniGBIC ports are shared with standard ports. If a miniGBIC port is used, then the shared standard port on the switch cannot be used. The following table defines the shared port mapping of the SLM2024 and SLM2048 switch.

Switch Model	miniGBIC Port	Standard Port
SLM2024	miniGBIC 1	Port 12
SLM2024	miniGBIC 2	Port 24
SLM2048	miniGBIC 1	Port 24
SLM2048	miniGBIC 2	Port 48

SLM248G, SLM248P, SLM224G, and SLM224P

The following section describes the SLM248G, SLM248P, SLM224G, and SLM224P switches. The front panel of the SLM248P is shown.

Front Panel

PoE — (Amber) Blinks to indicate that power is being supplied to a device attached to the corresponding port. PoE is available on:

•SLM224P ports 1-6, and 13-18

•SLM248P ports 1-12, and 25-36

100M (1-24 or 1-48)— (Amber) Appears on the “G” models of the switch on each port, and lights up to indicate a functional 100 Mbps connection on the corresponding port with an attached device. Appears on the “P” models of the switch only on the non-PoE ports:

•SLM224P ports 7-12, and 19-24

•SLM248P ports 13-24, and 37-48

Gigabit — (G1-G2)(Amber) Lights up to indicate a functional 1000 Mbps connection on the corresponding port (G1-G2) with an attached device.

2 Cisco Small Business SLM Series Smart Switch Installation Guide