Cisco Systems SLM2048, SLM248G, SLM2024, SLM248P quick start Getting Started with the, Configuration

STEP 5 Connect the switch to network devices according to the the installation instructions in section 4, “Connecting the Equipment”.

3	Getting Started with the
	Configuration

Before you begin to use the Configuration Utility, make sure that you have a computer that meets the following requirements:

•Internet Explorer (version 6 or higher) or Firefox (version 3 or higher).

•The Web-based configuration utility is optimized for a screen resolution of 1024 x 768.

To get started configuring your switch, perform the following:

STEP 1 Connect a computer to an available LAN port.

STEP 2 Start a web browser.

STEP 3 In the address bar, enter the default IP address of the switch, http://192.168.1.254 and press Enter.

6 Cisco Small Business SLM Series Smart Switch Installation Guide