Accton Technology ES4710BD manual Setup Configuration, Main Setup Menu

ES4710BD 10 Slots L2/L3/L4 Chassis Switch

Chapter 3 Setup Configuration

Setup configuration refers to the initial operation of the switch after the user purchases the switch. For first-time users of the ES4710BD, this chapter provides a very practical instruction. When using CLI (command line interface), the user can type setup under admin mode to enter the Setup configuration interface.

3.1Setup Configuration

Setup configuration is done via menu selections, in which the switch’s hostname, Vlan1 interface, Telnet service and SNMP can be configured.

3.1.1Main Setup Menu

Before entry into the main menu, the following screen will be displayed to prompt the user to select a preferred interface language. English users should choose “0” to enter the English interface, while Chinese users can choose “1” to view the interface in Chinese.

Please select language:

[0]:English

[1]:中文

Selection(01)[0]:

The main Setup configuration menu is listed below:

Configure menu

[0]: Config hostname

[1]: Config interface-Vlan1

[2]: Config telnet-server

[3]: Config web-server

[4]: Config SNMP

[5]: Exit setup configuration without saving

[6]: Exit setup configuration after saving

70