Accton Technology ES4710BD manual Ip pim bsr-border, Ip pim query-interval

ES4710BD 10 Slots L2/L3/L4 Chassis Switch

Command: ip pim sparse-mode no ip pim sparse-mode

Function: Enables PIM-SM protocol on the interface; the “no ip pim sparse-mode” command disables PIM-SM protocol on the interface.

Parameters: N/A.

Default: PIM-SM protocol is disabled by default.

Command mode: Interface Mode

Usage Guide:

Example: Enabling PIM-SM protocol on interface vlan1.

Switch (Config)#interface vlan 1

Switch(Config-If-Vlan1)#ip pim sparse-mode

19.4.2.2.2ip pim bsr-border

Command: ip pim bsr-border no ip pim bsr-border

Function: This command is the configuration command for interface BSR border. It is used to configure the border for PIM-SM area to prevent BSR message flooding outside the local PIM-SM area; the “no ip pim bsr-border” command cancels the BSR border configuration.

Parameters: N/A.

Default: BSR border configuration on interfaces is disabled by default.

Command mode: Interface Mode

Usage Guide: This command is the configuration commands for interface BSR border. It is used to configure the border for PIM-SM area to prevent BSR message flooding outside the local PIM-SM area. In other words, BSR messages inside the local PIM-SM area cannot be transferred from this interface to the outside; to cancel the setting of BSR border, the configuration of this command should be reverted.

Example: Enable BSR border setting on interface vlan 1. Switch (Config)#interface vlan 1 Switch(Config-If-Vlan1)#ip pim bsr-border

19.4.2.2.3ip pim query-interval

Command: ip pim query-interval <query interval> no ip pim query-interval

Function: Set interval for sending PIM HELLO packets in the interface; the “no ip pim query-interval” command restores the default setting.

Parameters: <query interval> is the interval for sending PIM HELLO packets, ranging from 1 to 18724s.

Default: The default interval for sending PIM HELLO is 30 seconds..

Command mode: Interface Mode

Usage Guide: The HELLO message enables PIM-DM switches to locate each other and establish the neighborhood. PIM-DM switches claim their existence by sending HELLO messages to their neighbors. If no HELLO message from a neighbor is received in a

471