ES4710BD 10 Slots L2/L3/L4 Chassis Switch
12.5.1Numeric standard ACL configuration
Click “Numeric ACL Configuration”, and then “Add Standard Numeric ACL” section to enter the configuration page. Equals to its CLI command of 12.2.2.2. The explanations of each section are: ACL number – 1- 99
Rule – permit or deny
Source address type – Specified IP address or any randomly allocated IP address Source IP address
Reverse network mask
Specify the number in the ACL number section and the relative values in the other 4 sections, then click “Add”, the users can then add the new Numeric Standard IP ACL.
12.5.2Delete numeric IP ACL
Click “Numeric ACL Configuration”, and then “Delete Numeric ACL” section to enter the configuration page, it is equals to CLI command of 12.2.2.1 and 12.2.2.2. The explanations of each section are:
ACL number
To delete the Numeric ACL, just simply specify the number of ACL and then click the “Remove”.
12.5.3Configure the numeric extended ACL
There are several extended numeric extended ACLs available:
zAdd ICMP numeric extended ACL
zAdd IGMP numeric extended ACL
zAdd TCP numeric extended ACL
zAdd UDP numeric extended ACL
zAdd numeric extended ACL for other protocols
By clicking the icons, it will enter the related configuration page which equals to its CLI command of 12.2.2.1
279
