364
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
Click “Egress-queue work mode configuration” to enter the configuration page. Equivalent to CLI
command 16.2.2.15.
Terms are described as following:
z Port name
z Reset-Will set column as startup defaults. This command will not modify the configuration.
z Apply-Will take effort to all setting. This command will modify the configuration.
z Default-Will back to startup setting. This command will modify the configuration.
Example: Configure the port as priority-queue mode: chose port name first, and then click Apply.
Click “Mapping CoS values to egress queue” to enter the configuration page. Equivalent to CLI
command 16.2.2.16.
Terms are described as following:
z Queue-ID
z CoS value-Mapping CoS values to Egress queue. Up to 8 queue to be supported.
z Reset-Will set column as startup defaults. This command will not modify the configuration.
z Default-Will reset to startup settings. This command will modify the configuration.
Example: set the packet with CoS value 2/3 to mapping egress queue 1, the Queue-ID should be set
as 1 and CoS value set with value 2/3, then click Apply.