ES4710BD 10 Slots L2/L3/L4 Chassis Switch
configuration.
17.4.3.1 Configure static ARP
Click “ARP configuration” to configure static ARP. Equivalent to CLI command 17.3.2.2.1:
zIP address: specifies the IP address of related static ARP
zMAC address: specifies the MAC address of related static ARP
zOperation type: Add means to add a static ARP item; Remove means to delete a static ARP item (selected from scroll bar menu)
zVlan Port: specifies the L3 port of static AP (selected from the drop down menu)
zPort: Specifies the L2 port of static ARP (selected from the drop down menu)
17.4.3.2 Clear ARP
Click “Clear ARP cache” to delete all dynamic ARP items. Equivalent to CLI command 17.3.2.2.3:
zApply: deletes all dynamic ARP
17.4.3.3 Show ARP
Click “Show ARP” to display all ARP items. No parameter is required. Equivalent to CLI command 17.3.3.1.1
17.4.3.4 Proxy ARP configuration
Click “Proxy ARP configuration” to setup Proxy ARP. Equals to CLI command 17.3.2.2.2:
zPort: specifies the L3 port to setup Proxy ARP (selected from the drop down menu)
zApply: enables Proxy ARP
zDefault: disables Proxy ARP
377
