Accton Technology ES4710BD Dhcp Server Configuration, Dhcp Sever Configuration Task Sequence

ES4710BD 10 Slots L2/L3/L4 Chassis Switch

obtained dynamically can be different every time; manually bound IP address will be the same all the time. 2) The lease period of IP address obtained dynamically is the same as the lease period of the address pool and is limited; the lease of manually bound IP address is theoretically endless. 3) Dynamically allocated addresses cannot be bound manually. 4) Dynamic DHCP address pool can inherit the network configuration parameters of the dynamic DHCP address pool of the related segment.)

14.2DHCP Server Configuration

14.2.1 DHCP Sever Configuration Task Sequence

1.Enable/Disable DHCP server

2.Configure DHCP Address pool

(1)Create/Delete DHCP Address pool

(2)Configure DHCP address pool parameters

(3)Configure manual DHCP address pool parameters

3.Enable logging for address conflicts

1.Enable/Disable DHCP server

Command	Explanation
Global Mode
service dhcp	Enables DHCP server
no service dhcp

2.Configure DHCP Address pool

(1)Create/Delete DHCP Address pool

Command			Explanation
Global Mode
ip dhcp pool <name>			Configures DHCP Address pool
no ip dhcp pool <name>
(2) Configure DHCP address pool parameters
Command			Explanation
DHCP Address Pool Mode
network-address	<network-number>		Configures the address scope that can be
[mask prefix-length]			allocated to the address pool
no network-address
default-router
[address1[address2[…address8]]]			Configures default gateway for DHCP clients
no default-router
		298