397
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
Usage Guide: The user can decide whether the routing protocols configured are correct and perform
routing troubleshooting according to the output of this command.
Example:
Switch#sh ip protocols
RIP information
rip is turning on
default metrict 16
neighbour is:NULL
preference is 100
rip version information is:
interface send version receive version
vlan2 V2BC V12
vlan3 V2BC V12
vlan4 V2BC V12
Displayed information Explanation
RIP is turning on The running routing protocol is RIP
default metric RIP protocol default metric value
neighbour is: The neighbor layer 3 switch connecting to this
RIP switch
Preference RIP routing priority
rip version information Displays the version information for RIP,
including the RIP version of sending (V1 for
RIP-I, V2 for RIP-II), RIP sending method (BC
for broadcast, MC for multicast), RIP version
of receiving (V1 for RIP-I, V2 for RIP-II, V12
for both RIP-I and RIP-II)
Command: show ip rip
Function: Displays the current running status and configuration information for RIP.
Command mode: Admin Mode
Usage Guide: The user can check the default metric of RIP route. The specified sending destination
address and metric value according to the output of this command will be shown.
Example:
Switch#sh ip rip
RIP information
rip is turning on