Accton Technology ES4710BD manual Port Mirroring Configuration Task Sequence

ES4710BD 10 Slots L2/L3/L4 Chassis Switch

mirror destination port. A protocol analyzer (such as Sniffer) or RMON monitoring instrument is often attached to the mirror destination port to monitor and manage the network and diagnostic.

ES4710BD support one mirror destination port only. The number of mirror source ports are not limited, one or more may be used. Multiple source ports can be within the same VLAN or across several VLANs. The destination port and source port(s) can be located in different VLANs.

7.2.4.2Port Mirroring Configuration Task Sequence

1.Specify mirror source port

2.Specify mirror destination port

1. Specify mirror source port

Command			Explanation
Global Mode
			Specifies mirror source port; the
monitor session <session>	source	{interface	“ no monitor session <session>
<interface-list> cpu [slot <slotnum>]} {rx tx both}			source		{interface
no monitor session <session>	source	{interface	<interface-list>		cpu	[slot
<interface-list> cpu [slot <slotnum>]}			<slotnum>]}” command deletes
			mirror source port.
2. Specify mirror destination port
Command			Explanation
Global Mode
			Specifies the mirror destination
monitor session <session> destination interface			port; the “no monitor session
<interface-number>			<session>		destination
no monitor session <session> destination interface			interface <interface-number>”
<interface-number>			command	deletes		mirror
			destination port.

7.2.4.3Port Mirroring Configuration

7.2.4.3.1monitor session source interface

Command: monitor session <session> source {interface <interface-list> cpu [slot <slotnum>]} {rx tx both}

no monitor session <session> source {interface <interface-list> cpu [slot <slotnum>]} Function: Specifies the mirror source port; the “no monitor session <session> source interface

<interface-list>” command deletes mirror source port.

171