Accton Technology ES4710BD manual Show ip dvmrp tunnel, Command show ip dvmrp tunnel ifname

ES4710BD 10 Slots L2/L3/L4 Chassis Switch

Command mode: Admin Mode

Usage Guide: This command is used to display DVMRP route table entries; DVMRP maintains

separated unicast route tables for RPF check.
Example: Displaying DVMRP routing information.
Switch #show ip dvmrp route
Switch #
Destination/Mask	Nexthop	Interface		Gateway	Metric state
192.168.1.0/24	192.168.1.11	Vlan1		No-Gateway	1 active
Switch #
Displayed information			Explanation
Destination/Mask			Target network segment or address and mask
Nexthop			Next hop address
Interface			The interface on which the route is discovered
Gateway			Gateway address
Metric			Route metric value
state			Route state (active, hold, etc)

19.5.4.1.4show ip dvmrp tunnel

Command: show ip dvmrp tunnel [<ifname>]

Function: Displays information for a DVMRP tunnel.

Parameters: <ifname> is the interface name, i.e., display the tunnel information of the specified interface.

Default: Not displayed.

Command mode: Admin Mode

Example: Displaying tunneling configuration information of Ethernet interface vlan1. Switch #show ip dvmrp tunnel vlan1

Name: dvmrp2, Index: 7, State:1195, Parent: 3, Localaddr: 192.168.1.11, Remote: 1.1.1.1

Switch #

Displayed information		Explanation
Name		Tunnel interface name (auto-generated by the
		system)
Index		Tunnel interface index number
State		Tunnel interface status
Parent		The index number of the parent interface for
		the tunnel interface
Localaddr		Local address of the tunnel interface
Remote		Remote end address of the tunnel
	489