ES4710BD 10 Slots L2/L3/L4 Chassis Switch
14.6.2.7Manual address pool configuration
Click “DHCP configuration”, “DHCP server configuration”, “Manual address pool configuration” to configure DHCP to manually allocate address:
zDHCP pool name – Choose one DHCP address pool
zHardware address – assigns user hardware address. Same as CLI command 14.2.2.7
zClient IP – allocated IP address for a specific client
zClient network mask – allocated IP address mask for a specific client. Same as CLI command 14.2.2.8
zUser name
Example: Choose DHCP pool name as 1, configure Hardware address as
14.6.2.8Excluded address configuration
Click “DHCP configuration”, “DHCP server configuration”, “Excluded address configuration” to exclude an address from dynamic allocation in the address pool. Same as CLI command 14.2.2.10:
zStarting address – is starting IP address
zEnding address – is ending IP address
zOperation type – configures or removes the address which will not be dynamic allocated in the address pool.
Example: Configure the Starting address as 10.1.128.1, configure Ending address as 10.1.128.10, and choose Operation type as Add address not for allocating dynamically. Click Apply button to apply this configuration to switch.
322
