339
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
priority <cos>]
no mls qos trust
disables the current trust status
of the port.
mls qos cos {<default-cos> }
no mls qos cos
Configures the default CoS
value of the port; the “no mls
qos cos” command restores the
default setting.
service-policy {input <policy-map-name> | output
<policy-map-name>}
no service-policy {input <policy-map-name> | output
<policy-map-name>}
Applies a policy map to the
specified port; the “no
service-policy {input
<policy-map-name> | output
<policy-map-name>}”
command deletes the specified
policy map applied to the port.
Egress policy map is not
supported yet.
mls qos dscp-mutation <dscp-mutation-name>
no mls qos dscp-mutation <dscp-mutation-name>
Applies DSCP mutation
mapping to the port; the “no
mls qos dscp-mutation
<dscp-mutation-name>”
command restores the DSCP
mutation mapping default.
5. Configure queue out method and weight
Command Explanation
Interface Mode
wrr-queue bandwidth <weight1 weight2
weight3 weight4 weight5 weight6 weight7
weight8>
no wrr-queue bandwidth
Sets WRR weight for specified egress
queue; the “no wrr-queue bandwidth”
command restores the default setting.
priority-queue out
no priority-queue out
Configures queue out method to pq method;
the “no priority-queue out” command
restores the default WRR queue out method.
Global Mode
wrr-queue cos-map <queue-id> <cos1 ...
cos8>
no wrr-queue cos-map
Sets CoS value mapping to specified egress
queue; the “no wrr-queue cos-map”
command restores the default setting.
6. Configure QoS mapping
Command Explanation
Global Mode
mls qos map {cos-dscp <dscp1...dscp8> | dscp-cos
<dscp-list> to <cos> | dscp-mutation
Sets CoS to DSCP mapping, DSCP to
CoS mapping, DSCP to DSCP mutation