Accton Technology ES4710BD manual Show ip pim mroute sm, Show ip pim neighbor

ES4710BD 10 Slots L2/L3/L4 Chassis Switch

Expires

The remaining time before considering the neighbor to be invalid.

19.4.4.1.3show ip pim mroute sm

Command: show ip pim mroute sm

Function: Displays the PIM-SM packet forwarding entry

Parameters: N/A.

Default: No display by default.

Command mode: Admin Mode

Usage Guide: This command is used to display PIM-SM multicast forwarding entries, or the forwarding entries in the system FIB table for forwarding multicast packets.

Example:

Switch # show ip pim mroute sm

BIT Proto: DVMRP 0x2, PIM 0x8, PIMSM 0x10, PIMDM 0x20;

Flags: RPT 0x1, WC 0x2, SPT 0x4, NEG CACHE 0x8, JOIN SUPP 0x10;

Downstream: IGMP 0x1, NBR 0x2, WC 0x4, RP 0x8, STATIC 0x10; PIMSM Group Table, inodes 1 routes 1:

(192.1.1.1, 225.0.0.1), protos: 0x8, flags: 0x0, 00:10:18/00:03:18 Incoming interface : Vlan1, RPF Nbr 0.0.0.0, pref 0, metric 0 Outgoing interface list:

(Vlan2), protos: 0x2, UpTime: 00:10:18, Exp:00:03:18 Switch #

Displayed information	Explanation
(192.1.1.1, 225.0.0.1)	Forwarding entry.
Incoming interface	Incoming interface, or RPF interface.
Outgoing interface list	Outgoing interface list.

19.4.4.1.4show ip pim neighbor

Command: show ip pim neighbor [<ifname>]

Function: Displays information for neighbors of the PIM interface.

Parameters: <ifname> is the interface name, i.e., displays PIM neighbor information of the specified interface.

Default: No display by default.

Command mode: Admin Mode

Usage Guide: If no interface name is specified, then neighbor information for all interfaces will be displayed.

Example: Displaying neighbor information for all interfaces (do not specify the interface name)

Switch # show ip pim neighbor
Neighbor-Address Interface		ifIndex Uptime		Expires DR-state
192.3.1.3	Vlan1	28	00:11:39 00:01:16 DR
			476