Accton Technology ES4710BD manual Switch a, Switch B

	ES4710BD 10 Slots L2/L3/L4 Chassis Switch
VLAN200	Site A and site B switch port 8 – 10.
Trunk port	Site A and site B switch port 11 .

Connect the Trunk ports of both switches for a Trunk link to convey the cross-switch VLAN traffic. Connect all network devices to the other ports of the corresponding VLANs.

In this example, port 1 and port 12 are not assigned and so can be used as management ports or for other purposes.

The configuration steps are listed below:

Switch A:

Switch(Config)#vlan 2

Switch(Config-Vlan2)#switchport interface ethernet 1/2-4

Switch(Config-Vlan2)#exit

Switch(Config)#vlan 100

Switch(Config-Vlan100)#switchport interface ethernet 1/5-7

Switch(Config-Vlan100)#exit

Switch(Config)#vlan 200

Switch(Config-Vlan200)#switchport interface ethernet 1/8-10

Switch(Config-Vlan200)#exit

Switch(Config)#interface ethernet 1/11

Switch(Config-Ethernet1/11)#switchport mode trunk

Switch(Config-Ethernet1/11)#exit

Switch(Config)#

Switch B:

Switch(Config)#vlan 2

Switch(Config-Vlan2)#switchport interface ethernet 1/2-4

Switch(Config-Vlan2)#exit

Switch(Config)#vlan 100

Switch(Config-Vlan100)#switchport interface ethernet 1/5-7

Switch(Config-Vlan100)#exit

Switch(Config)#vlan 200

Switch(Config-Vlan200)#switchport interface ethernet 1/8-10

Switch(Config-Vlan200)#exit

Switch(Config)#interface ethernet 1/11

Switch(Config-Ethernet1/11)#switchport mode trunk

Switch(Config-Ethernet1/11)#exit

209