Accton Technology ES4710BD manual 2.1 EM4710BD-AGENT, Front Panel Indicator

ES4710BD 10 Slots L2/L3/L4 Chassis Switch

z12 fiber Gb ports line card (EM4700BD-12GX-SFP): supporting 12 SFP Gb fiber ports for layer 2 and layer 3 switching and routing.

zDual 10Gb fiber line card (EM4700BD-2XG-XENPAK): supporting 2 10GBase-X fiber port (XENPAK) for layer 2 and layer 3 switching and routing.

zEnhanced processing card (EM-7600-ES): enabling enhanced services including IPv6, MPLS and firewall.

zEnhanced processing card with dual fiber Gb ports (EM-7600-ES-2GB): enabling enhanced services including IPv6, MPLS and firewall with 2 SFP 1000 Mb fiber ports.

1.4.2.1EM4710BD-AGENT

The EM4710BD-AGENT is switching module for the ES4710BD. System status control, switch management, user access control and administration, and network maintenances are performed here. The board can be inserted into M1 or M2 slots of the chassis for Master-Slave redundancy.

1.4.2.1.1Front Panel

The EM4710BD-AGENT comes with 1 Console port (control console) and 1 10/100Base-Tx Ethernet port (administration port).

The Front Panel view is shown below:

Fig 1-3 EM4710BD-AGENT Front Panel view

1.4.2.1.2Front Panel - Indicator

The following table describes the front panel indicators of EM4710BD-AGENT:

Table 1.1 EM4710BD-AGENT indicators description

LED	Panel Symbol	Status	Description
Power	PWR	On (Green)	Card powered
Indicator		Off	Card powered off
Operation	RUN	On (Green, blink at 1 Hz)	Cards operating normally
indicator
		On (Green, blink at 8 Hz)	System is loading (Booting after
			cards hot swapping)
		On (Yellow, blink at 8 Hz)	System is shutting down (Shutting
			Down after SWAP button pressed)
		On (Red, blink at 8 Hz)	Cards malfunction
		39