Accton Technology ES4710BD manual Reset specific module, Show slot

ES4710BD 10 Slots L2/L3/L4 Chassis Switch

6.4.1Reset specific module

Click “Device management”, “Reset specific module”, select a module number and click “Apply”, then that module will be hot-swapped. This function is equal to the CLI command showing in 6.2.1. Click the Reset button to confirm the selection of the module number. Note that the Active master module is not hot-swappable.

6.4.2Show slot

Click “Device management”, “Show slot”. An information column will display the current switch’s module information. This function is equal to CLI command 6.2.2.1.1.

155