Remote Setup
Chapter Two : Setting Up PowerTouch
3. Touch 
.
4.Touch 
.
5.Confirm the station name list and touch 
if it is
OK. If you do not want to finalize, touch 
to return to the previous screen.
The station name are written in the preset channel list.
42Storing Stations Manually
1.Touch 
(HOME 1) on the Quick access menu to ac- cess the HOME 1 menu.
2.Touch 
on the HOME 1 menu to access the Tuner controls.
3.Touch 
to choose the receiving band.
4.Touch 
to switch between Auto tuning and Manual tuning. Select Manual if you experience interference due to weak radio signals.
5.Choose the station you want to store using one of the following methods:
•Touch 
or 
until the station’s broadcast fre- quency appears.
•Touch 
and enter the broadcast frequency using the 10key pad. (e.g.; To select FM 87.5 MHz,
enter 8, 7, 5, 0, and 
)
Touch 
(check icon) to return to the TUNER control menu.
6. Touch 
.
7.Touch a storage button. Use 
or 
to access more storage buttons.
If you choose a storage button that already has a station assigned, the new station will replace the previously- stored station.
8.Touch 
to tune to the newly saved station and re- turn to the Tuner controls.
9.Repeat steps 3 through 9 for each station you want to store.
Touch 
to return to the TUNER control menu.
Name input of the preset station.
Touch 
to enter a name for the station in the TUNER menu:
•Use the stylus to select characters from the keyboard.
•Touch 
to access to lowercase characters. Touch it again to access special characters (such as @, !, &, etc.). Touch it a third time to return to uppercase char- acters.
•Touch 
or 
to move back and forth between the characters.
•Touch 
(backspace) to clear the last character you en- tered. Touch 
(all clear)to delete all the characters in the line.
•Touch 
to save your title.
