Kenwood VR-5900 Noting Your Devices, Jack Set, Manufacturer, Model #, Setup Code, Connections

Chapter One : Connecting Your Devices

Noting Your Devices

Jack Set Device Manufacturer Model # Setup Code

PHONO

CD1

MD/TAPE1

CD2/TAPE2 MONITOR

CD-R

MONITOR OUT	3
(TV on PowerTouch)
VIDEO1

VIDEO2

VIDEO3

VIDEO4

DVD

Connections

Use this table and the diagram on the preceding page to plan your connections before you make them, or use it to record your connections as you make them.

You will need this information later, when you set up your PowerTouch (see “Identifying Devices For PowerTouch Con- trol” on page 40). Recording this information now will save you additional trips behind your home entertainment cabi- net. You will fill in the Setup Code column when you are setting up PowerTouch.

When playing Dolby Digital*1 or DTS-encoded software in multichannel configuration, the connected audio signal should be the digital signal.

*1 When playing a LaserDisc recorded in the Dolby Digital format, connect the AC-3 RF output to the receiver (See page 26).