Accton Technology ES4710BD manual QoS Example

ES4710BD 10 Slots L2/L3/L4 Chassis Switch

<dscp1...dscp8> are the 8 DSCP value corresponding to the 0 to 7 CoS value, each DSCP value is delimited with space, ranging from 0 to 63; dscp-cos<dscp-list>to <cos> defines the mapping from DSCP to CoS value, <dscp-list>is a list of DSCP value consisting of up to 8 DSCP values, <cos> are the CoS values corresponding to the DSCP values in the list；dscp-mutation<dscp-mutation-name><in-dscp>to

<out-dscp>defines the mapping from DSCP to DSCP mutation, <dscp-mutation-name>is the name for mutation mapping, <in-dscp>stand for incoming DSCP values, up to 8 values are supported, each DSCP value is delimited with space, ranging from 0 to 63, <out-dscp>is the sole outgoing DSCP value, the 8

values	defined	in incoming DSCP will be converted to outgoing DSCP values;
ip-prec-dscp <dscp1...dscp8> defines the conversion from IP precedence to DSCP
value, <dscp1...dscp8> are 8 DSCP values corresponding to IP precedence 0 to 7,
each DSCP value is delimited with							space, ranging from 0 to				63; policed-dscp
<dscp-list> to		<mark-down-dscp> defines						DSCP mark down mapping, where
<dscp-list> is		a	list	of	DSCP values			containing		up to	8 DSCP values,
<mark-down-dscp>are DSCP value after mark down.
Default: Default mapping values are:
Default CoS-to-DSCP Map
CoS Value	0	1	2	3	4	5	6	7
DSCP Value	0	8	16	24	32	40	48	56
Default DSCP-to-CoS Map
DSCP Value	0–7	8–15		16–23		24–31	32–39		40–47	48–55	56–63
CoS Value	0	1		2		3	4		5	6	7
Default IP-Precedence-to-DSCP Map
IP Precedence Value		0	1	2	3	4	5	6	7
DSCP Value		0	8	16	24	32	40	48	56

dscp-mutation and policed-dscp are not configured by default

Command mode: Global Mode

Usage Guide: In police command, classified packet traffic can be set to mark down if exceed specified average speed or burst value, policed-dscp<dscp-list>to <mark-down-dscp>can mark down the DSCP values of those packets to new DSCP values.

Example: Setting the CoS-to-DSCPmapping value to the default 0 8 16 24 32 40 48 56 to 0 1 2 3 4 5 6 7.

Switch(Config)#mls qos map cos-dscp 0 1 2 3 4 5 6 7

16.3 QoS Example

Scenario 1:

Enable QoS function, change the queue out weight of Ethernet port 1/1 to 1:1:2:2:4:4:8:8, and set

348