|
| ES4710BD 10 Slots L2/L3/L4 Chassis Switch | ||
192.2.1.1 | Vlan2 | 31 | 00:11:39 00:01:16 / | |
192.4.1.4 | Vlan4 | 33 | 00:11:39 00:01:44 DR | |
192.4.1.3 | Vlan4 | 33 | 00:11:39 00:01:17 / | |
Switch # |
|
|
|
|
Displayed information |
|
| Explanation | |
|
|
| Neighbor address | |
Interface |
|
|
| The neighbor interface discovered |
ifIndex |
|
|
| Interface index number |
Uptime |
|
|
| The up time of the neighbor since discovery |
Expires |
|
|
| The remaining time before considering the |
|
|
|
| neighbor to be invalid |
|
|
| Whether the neighbor is a DR | |
19.4.4.1.5show ip pim rp
Command: show ip pim rp [mapping group-address]
Function: Displays PIM RP related information
Parameters: mapping displays the group address and RP association.
Default: No display by default.
Command mode: Admin Mode
Function: Displaying the RP information for PIM area 226.1.1.1.
Switch #show ip pim rp 226.1.1.1
RP Address for this group is: 192.2.1.1
Displayed information | Explanation |
RP Address | RP address of the group |
19.4.4.1.6debug ip pim
zCommand: debug ip pim
Function: Enables the debugging function for displaying detailed PIM information; the “no” format of this command disables this debug function.
Parameters: N/A.
Default: Disabled.
Command mode: Admin Mode
Usage Guide: If detailed information about PIM packets etc. is required, this debugging command can be used.
Example:
Switch # debug ip pim
PIM debug is on
477
