ES4710BD 10 Slots L2/L3/L4 Chassis Switch
21.3.1Monitor and Debug Commands
21.3.1.1show vrrp
Commands: show vrrp [<vrid>]
Function: Displays status and configuration information for the VRRP standby cluster.
Command mode: All Modes
Example:
Switch# show vrrp
VrId <1>
State is Initialize
Virtual IP is 10.1.20.10 (Not IP owner)
Interface is Vlan2
Priority is 100
Advertisement interval is 1 sec
Preempt mode is TRUE
VrId <10>
State is Initialize
Virtual IP is 10.1.10.1 (IP owner)
Interface is Vlan1
Configured priority is 255, Current priority is 255
Advertisement interval is 1 sec
Preempt mode is TRUE
Circuit failover interface Vlan1, Priority Delta 10, Status UP
Displayed information | Explanation |
State | Status |
Virtual IP | Dummy IP address |
Interface | Interface Name |
priority | Priority |
Advertisement interval | Timer interval |
Preempt | Preemptive mode |
Circuit failover interface | Interface Monitor information |
21.3.1.2debug vrrp
Commands: debug vrrp [ all event packet [recv send] ] no debug vrrp [ all event packet [recv send] ]
Function: Displays information for VRRP standby cluster status and packet transmission; the “no debug vrrp” command disables the debug information.
542
