ES4710BD 10 Slots L2/L3/L4 Chassis Switch

18.5.2.2.5 Set RIP timer

Click “RIP timer configuration” to enter the configuration page. Equivalent to CLI command 18.3.2.2.18

zUpdate time: sending update packet time interval

zInvalid timer: RIP route invalid time

zHolddown timer: specified invalid routes existing interval in the routing table

Example:

18.5.3 OSPF

Click “OSPF configuration” to open OSPF configuration. Includes:

zOSPF enable: enables OSPF protocol

zOSPF TX-parameter configuration: configures OSPF forwarding packet parameter

zImported route parameter configuration: configures OSPF imported route parameter

zOther parameter configuration: configures other parameter of OSPG protocol

zOSPF debug: OSPF debugging message.

18.5.3.1 Enable OSPF protocol

Click “OSPF enable” to open the configuration table. Includes:

zOSPF enable: enables/disables OSPF protocol

zRouter-ID configuration: configures the router ID number of the OSPF protocol

zOSPF network range configuration: configures OSPF network range of OSPF

zOSPF area configuration for port: configures OSPF area for port

18.5.3.1.1 Enable/Disable OSPF protocol

449

Page 450
Image 450
Accton Technology ES4710BD manual Set RIP timer, Enable Ospf protocol, Enable/Disable Ospf protocol