
| ES4710BD 10 Slots L2/L3/L4 Chassis Switch | |
|
|
|
Right “→” | The cursor moves one character to the |
|
| right. |
|
Ctrl+p | The same as Up key “↑”. | |
Ctrl+n | The same as Down key “↓”. | |
Ctrl+b | The same as Left key “←”. | |
Ctrl+f | The same as Right key “→”. | |
Ctrl+z | Returns to the Admin Mode directly from the other configuration modes | |
| (except User Mode). | |
Ctrl+c | Breaks the ongoing command process, such as ping or other command | |
| execution. | |
Tab | When a string for a command or keyword is entered, the Tab can be used | |
| to complete the command or keyword if there is no conflict. |
4.2.1.4Help function
There are two ways in ES4710BD for the user to access help information: the “help” command and the “?”.
Access to Help | Usage and function |
Help | Under any command line prompt, type in “help” and press Enter to get a brief |
| description of the associated help system. |
“?” | 1.Under any command line prompt, enter “?” to get a command list of |
| the current mode and related brief description. |
| 2.Enter a “?” after the command keyword with a embedded space. If |
| the position should be a parameter, a description of that parameter |
| type, scope, etc, will be returned; if the position should be a |
| keyword, then a set of keywords with brief descriptions will be |
| returned; if the output is “<cr>”, then the command is complete, |
| press Enter to run the command. |
| 3.“?” immediately following a string. This will display all the |
| commands that begins with that string. |
4.2.1.5Input verification
4.2.1.5.1Returned Information: success
All commands entered through keyboards undergo syntax check by the Shell. Nothing will be returned if the user entered a correct command under corresponding modes and the execution is successful.
4.2.1.5.2Returned Information: error
Output error message
Explanation
90