Accton Technology ES4710BD manual In-band Management, Management via Telnet

ES4710BD 10 Slots L2/L3/L4 Chassis Switch

Current time is WED APR 20 09:37:52 2005

ES4710BD Series Switch Operating System,

Software Packet Version ES4704BD_2.2.10.0

Copyright (C) 2001-2004 by Accton Technology Corp.

http://www.edge-core.com

ES4710BD Switch (MPC8245-266M) processor

ES4710BD>

The user can now enter commands to manage the switch. For a detailed description of commands,

please refer to the following chapters.

4.1.2In-band Management

In-band management refers to the management by logging into the switch using Telnet or ECview. ECview is a network management software developed by Edge-Core. In-band management enables management of the switch by devices attached to the switch. In the case when in-band management fails due to switch configuration changes, out-of-band management can be used for configuring and managing the switch.

4.1.2.1Management via Telnet

To manage the switch with Telnet, the following conditions should be met:

1)Switch has an IP address configured

2)The host’s IP address (Telnet client) and the switch’s VLAN interface IP address are in the same network segment.

3)If not 2), the Telnet client can connect to an IP address of the switch via other devices, such

as a router.

ES4710BD is a Layer 3 switch that can be configured with several IP addresses. The following example assumes the shipment’s default status of the switch, only VLAN1 exists in the system.

The following describes the steps for a Telnet client to connect to the switch’s VLAN1 interface by Telnet.

82