Accton Technology ES4710BD manual Maintenance and Debug Commands, Setup, Language, Write, Ping

ES4710BD 10 Slots L2/L3/L4 Chassis Switch

Switch#reload

5.1.12setup

Command: setup

Function: Enters the Setup Mode of the switch.

Command mode: Admin Mode

Usage Guide: ES4710BD provides a Setup Mode, in which the user can configure IP addresses, etc.

5.1.13language

Command: language {chineseenglish}

Function: Sets the language for displaying the help information.

Parameters: chinese for Chinese display; english for English display.

Command mode: Admin Mode

Default: The default setting is English..

Usage Guide: ES4710BD provides help information in two languages, the user can select the language according to their preference. After the system restart, the help information display will revert to English.

5.1.14write

Command: write

Function: Saves the currently configured parameters to the Flash memory.

Command mode: Admin Mode

Usage Guide: After a set of configurations with desired functions, the setting should be saved to the Flash memory, so that the system can revert to the saved configuration automatically in the case of accidental power down or power failure. This is the equivalent to the copy running-configstartup-configcommand.

Related commands: copy running-config startup-config

5.2Maintenance and Debug Commands

When users configure the switch, they will need to verify whether the configurations are correct and the switch is operating as expected, and in the case of network failure, the users will also need to diagnose the problem. ES4710BD provides various debugging methods including ping, Telnet, show, debug, etc. to help the users to check system configuration, operating status and locate problem causes.

5.2.1ping

Command: ping [<ip-addr>]

97