Accton Technology ES4710BD manual Value

ES4710BD 10 Slots L2/L3/L4 Chassis Switch

(1) Configure RIP sending mechanism

a. Configure regular RIP packets transmission b. Configure RIP advertisement

Command	Explanation
RIP configuration mode
	Indicates RIP layer 3 switch allows all ports to
[no] rip broadcast	send broadcast/multicast packets; the “no rip
	broadcast” command disables all ports to send
	broadcast/multicast packets

2)Configure RIP routing parameters. a. Configure route aggregation

Command	Explanation
RIP configuration mode
auto-summary	Configures route	aggregation; the	“no
	auto-summary”	command disables	route
no auto-summary
	aggregation.

b. configure route introduction (default route metric, configure routes of the other protocols to be introduced in RIP)

Command	Explanation
RIP configuration mode
default-metric <value>	Sets the default	route metric for route to be
	introduced; the	“no default-metric” command
no default-metric
	restores the default setting.
redistribute { static ospf bgp} [ metric	Introduces static, OSPF or BGP routes to RIP
<value> ]	packets; the “no redistribute { static ospf
	bgp }” command cancels the introduced routes of
no redistribute { static ospf bgp }
	specified protocol.
c. Enable interface to send/receive additional routing metric of RIP packets
Command	Explanation
Interface Mode
	Sets the additional route metric for route on
ip rip metricout <value>	sending RIP packets from the interface; the “no ip
no ip rip metricout	rip metricout” command restores the default
	setting.
	Sets the additional route metric for route on
ip rip metricin <value>	receiving RIP packets from the interface; the “no
no ip rip metricin	ip rip metricin” command restores the default
	setting.
d. Configure interface authentication mode and password
Command	Explanation
Interface Mode
	387