ES4710BD 10 Slots L2/L3/L4 Chassis Switch
Click “Vlan configuration”, “Vlan configuration”, “Enable/Disable Vlan filter rule” to open VLAN ingress configuration list to setup VLAN filter function.
9.5.1.6.1Disable Vlan ingress rule
Click “Vlan configuration”, “Vlan configuration”, to Enable/Disable Vlan ingress rule.
Example: Select Ethernet port 1/1 and click the Apply button and the VLAN ingress rule of port 1/1 will be disabled. Select Default button to enable the VLAN ingress rule.
9.5.2GVRP configuration
Click “Vlan configuration”, “GVRP configuration” to open the GVRP configuration management list to manage GVRP function of the switch.
9.5.2.1Enable global GVRP
Click “Vlan configuration”, “GVRP configuration”, “Enable global GVRP” to enable/disable the global GVRP function of the switch. Equals to CLI command 9.3.2.5.
Example: Select Enable GVRP and click Apply button to enable global GVRP function.
9.5.2.2Enable port GVRP
Click “Vlan configuration”, “GVRP configuration”, to enable/disable port the GVRP function of the switch. Equals to CLI command 9.3.2.5.
Example: Select Ethernet port 1/1, select Enable GVRP and click Apply button then the GVRP
function of port 1/1 will be enabled. Note: only the Trunk port can enable GVRP function.
9.5.2.3GVRP configuration
222
