420
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
Command: show ip ospf
Function: Displays major OSPF information.
Default: Nothing displayed by default
Command mode: Admin Mode
Example:
Switch#show ip ospf
my router ID is 11.11.4.1
preference=10 ase perference=150
export metric=1
export tag=-2147483648
area ID 0
interface count：1
80times spf has been run for this area
net range：
LSRefreshTime is1800
area ID 1
interface count：1
41times spf has been run for this area
net range：
netid11.11.3.255 netaddress11.11.0.0 netmask255.255.252.0
LSRefreshTime is1800
Displayed information Explanation
my router ID The ID of the current layer 3 switch.
preference Routing protocol priority.
ase perference Exterior routes priority for introduction.
export metric The metrics for output from the port
export tag The route tag for output from the port.
area ID
interface count
imes spf has been run for this area
net range
OSPF area number: including statistics for
interface number in the area, SPF algorithm
calculation time and network scope.
18.4.2.2.23 show ip ospf ase Command: show ip ospf ase
Function: Displays exterior OSPF routing information.
Default: Nothing displayed by default
Command mode: Admin Mode
Example:
Switch#show ip ospf ase