Accton Technology ES4710BD PIM-SM configuration Enable PIM-SM, PIM-SM parameter configuration

ES4710BD 10 Slots L2/L3/L4 Chassis Switch

zQuery-Interval － Configures local interface PIM-DM hello message interval time

zVlan Port － assigns layer 3 interface（select from scroll bar menu）

zApply － runs according to configured parameter

zDefault － restores local interface PIM-DM hello message interval time to default

19.7.3PIM-SM configuration

19.7.3.1Enable PIM-SM

In PIM-SM protocol configuration mode, click “Enable PIM-SM” to enable or disable PIM-SM protocol in the layer 3 interface. This is the same as CLI command 19.4.2.2.1

zEnable PIM-SM － yes means enable PIM-SM protocol; no means disable PIM-SM protocol

zVlan Port － assigns layer 3 interface（select from scroll bar menu）

zApply － runs according to configured parameter

zDefault － disables assign layer 3 interface PIM-SM protocol

19.7.3.2PIM-SM parameter configuration

Click “PIM-SM parameter configuration” to configure PIM-SM running parameter for a specific layer 3 interface. This is the same as CLI command 19.4.2.2.3

zQuery-Interval － Configures local interface PIM-SM hello message interval time

zVlan Port － assigns layer 3 interface（select from scroll bar menu）

zApply － runs according to configured parameter

zDefault － restores local interface PIM-DM hello message interval time to default

19.7.3.3Set interface as PIM-SM BSR border

Click “Set interface as PIM-SM BSR border” to configure the PIM-SM domain border. In order to prevent BSR message diffusing this PIM-SM domain, configure the specific interface as PIM-SM domain border. This is the same as CLI command 19.4.2.2.2

zVlan Port － assigns layer 3 interface（select from scroll bar menu）

zApply － runs according to configured parameter

zDefault － cancels local interface working as PIM-SM domain border

502