ES4710BD 10 Slots L2/L3/L4 Chassis Switch
Automatic network summarization is not in | Disable RIP auto aggregation |
effect |
|
default metric for redistribute is :16 | The default metric for introduced route is 16. |
neigbour is | The specified destination address. |
preference is :100 | RIP routing priority is 100. |
（2）show ip route
The “show ip route” command can be used to display the information about RIP routes in the route table: destination IP addresses, network masks, next hop IP addresses, and forwarding interfaces, etc.
For example, displayed information can be: Switch#show ip route
Total route items is 2, the matched route items is 2
Codes: C - connected, S - static, R - RIP derived, O - OSPF derived
A - OSPF ASE, B - BGP derived, D - DVMRP derived
| Destination | Mask | Nexthop | Interface | Pref |
C | 2.2.2.0 | 255.255.255.0 | 0.0.0.0 | vlan1 | 0 |
R | 7.7.7.0 | 255.255.255.0 | 2.2.2.8 | vlan2 | 100 |
R stands for RIP route, i.e., the RIP route with the destination network address of 7.7.7.0, network mask of 255.255.255.0, the next hop address of 2.2.2.8 and the forwarding interface of Ethernet vlan2. The priority value of this route is 100.
（3）show ip protocols
“show ip protocols” command can be used to display the information of the routing protocols running in the switch.
For example, displayed information can be: Switch#sh ip protocols
RIP information:
Automatic network summarization is not in effect.
default metric for redistribute is :16 |
|
| |
neigbour is:NULL |
|
| |
preference is :100 |
|
| |
RIP version information is: |
|
| |
interface | send version | receive version | |
vlan1 | V2BC |
| V12 |
vlan2 | V2BC |
| V12 |
vlan3 | V2BC |
| V12 |
Switch# |
|
|
|
|
|
| |
Displayed information |
| Explanation | |
Automatic | network summarization | is not in | Disables RIP |
effect |
|
|
|
|
| 403 | |
