ES4710BD 10 Slots L2/L3/L4 Chassis Switch

19.7WEB MANAGEMENT

Click “root page” left content column “Multicast protocol configuration” to enter into multicast protocol configuration root node and make configuration for multicast protocol.

zClick Multicast common configuration to enter into multicast protocol public monitor mode

zClick PIM-DM configuration to enter into PIM-DM protocol configuration mode

zClick PIM-SM configuration to enter into PIM-SM protocol configuration mode

zClick DVMRP configuration to enter into DVMRP protocol configuration mode

zClick IGMP configuration to enter into IGMP protocol configuration mode

zClick Inspect and debug to enter into multicast protocol debug monitor mode

19.7.1Multicast public monitor command

Example: In multicast protocol public monitor mode, click Show ip mroute to display IP multicast message forward item. This is the same as CLI command 19.2.1.1.1. No additional parameter configuration necessary. For the detailed information, please refer to 19.2.1.1.1

19.7.2PIM-DM configuration

19.7.2.1Enable PIM-DM

In PIM-DM protocol configuration mode, click “Enable PIM-DM” to enable or disable PIM-DM protocol in layer 3 interface. This is the same as CLI command 19.3.2.3.

zEnable PIM-DM: yes means enable PIM-DM protocolno means disable PIM-DM protocol

zVlan Port: assigns layer 3 interface (select from scroll bar menu

zApply: runs according to configured parameter

zDefault: disables assign layer 3 interface PIM-DM protocol

19.7.2.2PIM-DM parameter configuration

Click “PIM-DM parameter configuration” to configure the PIM-DM running parameters for a specific layer 3 interface. This is the same as CLI command 19.3.2.4.

501

Page 502
Image 502
Accton Technology ES4710BD manual Multicast public monitor command, PIM-DM configuration Enable PIM-DM