37
EES4710BD 10 Slots L2/L3/L4 Chassis Switch
a grounding post has been provided on each side of the rack for grounding connections. In addition,
on both sides of the lower section of the chassis, a handler is provided for easier transport.
Fig 1-2 ES4710BD Front Panel view
Management slot: 2 management slots are provided. One or two management
switching modules EM4710BD-AGENT can be inserted in to the Management
slots.
Network slot: 8 network slots are provided. Various network modules can be
added to the network slots, such as EM4700BD-12GT-RJ45,
EM4700BD-12GX-SFP,
EM4700BD-2XG-Xenpak,etc.
Power slot: used for system power supply modules. Supports up to three 600W
AC modules or three 600W DC modules.
Fan tray slot: supports up to three system fan assemblies, each assembly consists
of two axial fans.
Dust gauze slot: exterior air inlet for the ventilation subsystem.
Distribution box slot: for system distribution box use, works in AC/DC mode
based on the power modules.
The board rack consists of board slots and a system board.
The boards are inserted vertically into the ES4710BD 10 unit boards are provided. These include 2
management slots in the middle for management switch modules, marked specially in red as M1 and
M2. The other eight board slots are network slots for various network interface modules, sequenced
as 1 to 8 from left to right.
A reset button (printed on the panel as Reset), hot swap button (printed on the panel as SWAP),
board power indicator (printed on the panel as PWR) and board running status indicator (printed on