Accton Technology ES4710BD manual Enable port security timeout, Binding MAC, Clearing port MAC

ES4710BD 10 Slots L2/L3/L4 Chassis Switch

8.6.2.2.3Enable port security timeout

Click “MAC address table configuration”, “MAC address binding configuration”, “Lock port”, “Enable port security timeout” to lock port security. Equals to CLI command 8.5.1.2.2.4:

z Port: specifies the configuration port

zTimeout Value (0-300 seconds): Lock the time out value

Example: Select Ethernet port 1/1 and set up Timeout value as 30 seconds, then click the Apply button. The Ethernet port 1/1 security timeout will then be 30 seconds

8.6.2.2.4Binding MAC

Click “MAC address table configuration”, “MAC address binding configuration”, “Lock port”, “Binding MAC”, to add/remove static security MAC addresses. Equals to CLI command 8.5.1.2.2.5

zPort: Specifies the port

zPort security MAC: MAC address

Operation type: adds/removes static security addresses.

Example: Select Ethernet Port 1/1 and assign MAC as 00-11-11-11-11-11, select add static security address then click the Apply button to apply this setting to the switch.

8.6.2.2.5Clearing port MAC

Click “MAC address table configuration”, “MAC address binding configuration”, “Lock port”, “Clearing port MAC” to clear the dynamic MAC addresses of the selected port. Equals to CLI command 8.5.1.2.2.6.

zMac: Specifies the deleted MAC

zPort: Specifies the port to delete MAC

Example: Select Ethernet port 1/1 and click the Apply button then the dynamic MAC of Ethernet port 1/1 will be deleted.

199