ES4710BD 10 Slots L2/L3/L4 Chassis Switch
Click RIP configuration to open RIP configuration including:
zEnable RIP: enable RIP including
9 Enable RIP: enable
9 Enable port to receive/transmit RIP packet
zRIP parameter configuration (optional) including: 9 Enable imported route
9 Metricin/out configuration
9 RIP port imported route
9 RIP mode configuration
9 RIP timer configuration
18.5.2.1RIP configuration
18.5.2.1.1Enable RIP
Click “Enable RIP” to enter configuration page. Equivalent to CLI command 18.3.2.2.17.
zEnable RIP: Enables RIP and Disables RIP
Example: Select Enable RIP and click Apply button to enable RIP.
18.5.2.1.2Enable port to receive/transmit RIP packet
Click “Enable port” to enter configuration page for receiving/transmitting RIP packet. Equivalent to CLI command 18.3.2.2.11
zPort: specify port
zEnable port to receive/transmit RIP packet: set or cancel
Example: Select port valn1 and cancel. Click Apply to cancel receive/transmit packets on vlan1
18.5.2.2RIP parameter configuration
18.5.2.2.1Enable imported route
Click “Enable imported route” to enter the configuration page. Equivalent to CLI command 18.3.2.2.13
zImport other routing protocol to RIP: includes Static, OSPF, BGP
446
