ES4710BD 10 Slots L2/L3/L4 Chassis Switch

zAuthentication mode – Configures the access control method for a specific port. Mac-based is access control method which is based on MAC address; port-based access control method which is based on port. Same as CLI command 20.2.2.10.

zPort maximum user(1-254) - Configures the permission maximum user for specific port. Same as CLI command 20.2.2.8.

Example: Choose Ethernet port1/1, choose 802.1x status as Open, choose Authentication type as auto, choose Authentication mode as port based, configure Port maximum user as 10 and then click the Set button to apply this configuration to switch.

20.5.2.3 802.1X port mac configuration

Click “Authentication configuration”, “802.1X configuration”, “802.1x port mac configuration” to Add a MAC address table to dot1x address filter. Equivalent to CLI command 20.2.2.3.

zPort – If specify port, the added list only suitable for specific port, specify All Ports, the added list suitable for all port.

zMac – adds MAC address

zOperation type – adds, removes filter MAC

Example: Choose Ethernet port 1/1, configure MAC as 00-11-11-11-11-11, choose Operation type as Add mac filter entry, and then click the Apply button to apply this configuration to switch.

20.5.2.4 802.1X port status list

Click “Authentication configuration”, “802.1X configuration”, “802.1x port status list” to display

532

Page 533
Image 533
Accton Technology ES4710BD manual 20.5.2.3 802.1X port mac configuration, 20.5.2.4 802.1X port status list