ES4710BD 10 Slots L2/L3/L4 Chassis Switch

16.5.4.2 Port default CoS configuration

Click “Port default CoS configuration” to entry configure page. Equivalent to CLI command 16.2.2.11.

Terms are described as following:

zPort

zDefault CoS valueStartup CoS value

zResetWill set column as startup defaults. This command will not modify the configuration.

zApplyWill take effort to all setting. This command will modify the configuration.

zDefaultWill back to startup setting. This command will modify the configuration.

Example: Setting the CoS value as 5 in Ethernet port 1/1 and click Apply to finish.

16.5.4.3 Apply policy-map to port

Click “Apply policy-map to port” to enter the configuration page. Equivalent to CLI command 16.2.2.12.

Terms are described as following:

zPort

zPolicy-map name

zPort directionInput or Output

zOperationSet or Remove

zResetWill set column as startup defaults. This command will not modify the configuration.

zApplyWill take effort to all setting. This command will modify the configuration.

Example: Choose Ethernet1/1 for port and p1 for policy-map; select Input for port direction and Set for operation, then click Apply.

16.5.4.4 Apply DSCP mutation mapping

Click “Apply DSCP mutation mapping” to enter the configuration page. Equivalent to CLI command 16.2.2.13.

Terms are described as following:

362

Page 363
Image 363
Accton Technology ES4710BD manual Port default CoS configuration, Apply policy-map to port, Apply Dscp mutation mapping