Accton Technology ES4710BD Policy-mappolicy-map-name, No policy-mappolicy-map-name, New-dscp

ES4710BD 10 Slots L2/L3/L4 Chassis Switch

policy-map<policy-map-name>						Creates a policy map and enters policy
no policy-map<policy-map-name>						map mode;		the	“no	policy-map
						<policy-map-name>” command deletes
						the specified policy map.
class <class-map-name>						After a policy map is created, it can be
no class <class-map-name>						associated to a class. Different policy or
						new DSCP value can be applied to
						different data streams in class mode; the
						“no class <class-map-name>” command
						deletes the specified class.
set	{ip dscp	<new-dscp>		ip	precedence	Assigns a new DSCP and IP precedence
<new-precedence>}						value for the classified traffic; the “no set
no set {ip dscp <new-dscp>				ip	precedence	{ip dscp <new-dscp>			ip	precedence
<new-precedence>}						<new-precedence>}” command cancels
						the newly assigned value.
police <rate-kbps> <burst-kbyte> [exceed-action						Configures a policy to classify traffic,
{drop policed-dscp-transmit}]						data stream exceeding the limit will be
no	police	<rate-kbps>		<burst-kbyte>		dropped	or degraded; the			“no	police
[exceed-action {drop policed-dscp-transmit}]						<rate-kbps>			<burst-kbyte>
						[exceed-action			{drop
						policed-dscp-transmit}]”				command
						deletes the specified policy.
mls		qos	aggregate-policer			Defines a policy set, perform different
<aggregate-policer-name>					<rate-kbps>	actions to out-of-profile data streams,
<burst-kbyte>		exceed-action			{drop	such as discard or degrade. This policy
policed-dscp-transmit}						can be used in one policy map by several
no	mls	qos	aggregate-policer			classes;	the	“no		mls	qos
<aggregate-policer-name>						aggregate-policer
						<aggregate-policer-name>” command
						deletes the specified policy set.
police aggregate <aggregate-policer-name>						Applies a policy set to classified traffic;
no police aggregate <aggregate-policer-name>						the	“no	police		aggregate
						<aggregate-policer-name>” command
						deletes the specified policy set.

4. Apply QoS to ports

Command					Explanation
Interface Mode
mls	qos	trust	[cos	[pass-through-dscp]dscp	Configures port trust; the “no
[pass-through-cos]ip-precedence [pass-through cos]port					mls qos trust” command
				338