Extron electronic DVS 605 manual Audio Configuration Audio mute global settings, ASCII Command

Command	ASCII Command	Response	Additional Description
	(host to scaler)	(scaler to host)

Screen saver mode (action that takes place when no signal is detected on the selected input)

Set mode	EMX3)SSAV}	SsavMX3)]
View mode	EMSSAV}	X3)]
Set sync timeout	ETX2%SSAV}	SsavTX2%]
duration
View sync timeout	ETSSAV}	X2%]
duration
View screen saver	ESSSAV}	X4^]
status

Sets the screen saver mode to X3) (default: 1 = black).

View the current screen saver mode.

Sets sync timeout duration to X2% seconds (default: 501 = never).

View sync timeout duration X2%.

View the screen saver status X4^.

Audio Configuration

Audio mute (global settings)

Mute on	1Z	Amt1]	Mute selected input.
Mute off	0Z	Amt0]	Un-mute selected input.
View status	Z	X(]	View mute status (0 = mute off, 1 = mute
			on).

Audio gain and attenuation (audio models only: per analog input)

Set gain/	X4)G	AudX4)]	Set gain/attenuation on current input to
attenuation			X4) dB.
Increment	+G	AudX4)]	Increment audio level (up).
Decrement	-G	AudX4)]	Decrement audio level (down).
View	G	X4)]	View current audio level.
Volume control (audio models only)
Set specific volume	X3*V	VolX3*]	Set volume to X3*.
Increment	+V	VolX3*]	Increase volume.
Decrement	-V	VolX3*]	Decrease volume.
View	V	X3*]	View current volume setting.
Audio delay (available on all models)
Set static delay	ESX4#ADLY}	AdlySX4#]	Set static audio delay to X4# ms (range =
			0-255 ms).
View setting	ESADLY}	X4#]	View audio delay (X4#) in milliseconds.

NOTE: X( = Enable/disable; 0 = Off/disable, 1 = On/enable

X2% = On-screen menu time-out: (default = 3 seconds), output sync time-out (default = 501 - never)

0 = OSD never displayed/output sync is instantly disabled with no active input,

1 to 500, in 1 second increments, 501 = OSD never times out/output sync never times out

X3) = Screen saver mode: 1 = Black screen (default), 2 = Blue screen with OSD text

X3* = Audio volume range: 000 to -100 dB (default = -30 dB), in 1.0 dB step, with max = 0 dB and min = -100 dB.

attenuation, plus hardware mute

X4) = -53 through +09 dB, (with leading “+” or “–“)

X4# = Static audio delay: 0 through 255 milliseconds

X4^ = Screen saver status: 0 = Active input detected; timer not running, 1 = No active input; timer is running; output sync still active, 2 = No active input; timer has expired; output sync disabled

DVS 605 • SIS Communication and Control 48