Extron electronic DVS 605 Resolution, Refresh rate, Analog signal format, Analog sync polarity

Input/Output Configuration Page — Output Configuration Panel

The right panel consists of user configurable fields for video outputs. These include: output resolution, refresh rate, signal format and sync polarity for the analog output, and signal format for the digital output. The switch transition mode between inputs can be set, and a test pattern selection is available for use in calibrating a connected display. The genlock settings can also be set on all models.

Figure 35. Input Configuration Panel

Resolution

Click on the arrow and from the drop-down list box select the applicable output resolution. The selectable resolutions include five user customizable ones: C1-C5.

See the resolution and refresh rate table on page 18 for a full list. Default is 720p/60 Hz

Refresh rate

Click on the arrow and from the drop-down list box select the applicable refresh rate.

Analog signal format

Click on the arrow and from the drop-down list box select an applicable signal format. Selectable formats are: RGBHV (default), RGBS, RGBcvS, (Y, R-Y,B-Y bi-level), and (Y, R-Y,B-Y tri-level).

Analog sync polarity

Click on the arrow and from the drop-down list box select the applicable sync polarity, Choices are: H-/ V- (default), H+/ V-, H+/ V+, H-/ V+.

NOTE: The sync polarity option is only available when the output format is RGBHV.

DVS 605 • Using the Default Web Pages 67