Image Settings Page
From this page signal sampling and picture control settings can be set, user and input presets can be saved and recalled, and overscan settings can be applied.
Click on this button 
to open the Image Settings page.
Figure 38. Image Settings Page
Signal Sampling
In this section settings for the currently selected input signal can be adjusted. Adjustable fields are: the number of active lines, active pixels, total pixels, horizontal and vertical start settings, and the pixel phase. In addition an
In the Signal Sampling section, adjust an input signal setting by entering a value or clicking the up > and down < arrows in the field associated with the setting. An asterisk beside a chosen value for a signal sampling setting indicates that it is a default value for the applied input signal.
An
To perform an
1.Click on the
2.Select
Auto‑Image: with follow (to maintain the aspect ratio of the input).
See
DVS 605 • Using the Default Web Pages | 71 |
